Quality blow mold company supplier: The production process is the first injection molding bottom blank, the material is continuously transported to the heating furnace, after heating to reach the tensile temperature, and then into the blow mold with the help of the tensile rod for axial stretching, and finally by blowing molding. Blow molding will extrude the molten thermoplastic raw material from the extruder, add it to the mold, and then by blowing air into the raw material, the melted raw material expands under the action of air, fits to the mold cavity wall, and then cools and solidifies into the desired product shape. Blow molding process can be divided into film blow molding and hollow blow molding. See more details on precision cnc machining parts factory.
Mulan Group specializes in the manufacture of customized parts. It has been engaged in the customized production of plastic and metal parts for more than 18 years. Mulan Group uses advanced processing equipment and scientific quality management system to provide global suppliers with one-stop customized plastic and metal custom parts production solutions. Mulan Group provides a cost-effective one-stop supply service with an efficient sales team, reasonable low-cost quotation and strong manufacturing resources.
As an injection mold manufacturer, Mulan Group has been engaged in plastic molding molds for more than 25 years. We have a professional in-house mold manufacturing factory, located in Shanghai, China, a high-quality mold manufacturing base, equipped with a team of engineers with rich manufacturing experience and professional knowledge. Rely on digital programming software and equipment to customize precision injection mold services after the part design is completed. Allow the material to fill the mold cavity without obstacles to ensure that the product will not have defects. For some appearance parts, a smooth surface is an important factor in obtaining market value. We will use very small pinhole feeds. There are no traces on the surface of the product, and it is hidden on the surface of the product installation part.
Blow molding is widely used in the production of hollow structure products, such as: water bottles, oil drums, chemical turnover barrels, floats, medical reagent bottles, etc. Injection blow molding is suitable for small container production, and stretch blow molding is suitable for medium and large-volume container products. However, the surface effect of injection blow molded products is better than stretch blow molding, and can be highly transparent and flat. Drinking water bottles are the most typical injection blow molding. Blow molding has many limitations due to the molding principle, so there are a few points that should be paid attention to when designing blow molding products: Only limited to hollow structural parts. The wall thickness is thin and the strength is low. By adding other materials in the multilayer part, the effect of blocking sound and heat sources is increased. (So not recyclable) A second trimming is required to remove burrs and excess material.
Rotomolding molds are usually made of cast aluminum or steel plates without the aid of high pressure, so the mold process is relatively simple, the cost is low, and small batch production has economic advantages and is suitable for early investment in product development. Rotomolding relies on the material to adhere to the inner wall of the mold, which has very low restrictions on the shape of the product. It can be achieved smoothly through reasonable design of the mold details. And you can easily create functions such as reinforced ribs, custom textures, and in-mold inlays.
Plastic overmolding metal: We use CNC machining/metal casting/sheet metal bending/sheet metal stamping on metal materials to pre-mold the designed substrate, and then wrap the plastic around the metal substrate at one time through overmolding, such as: pipe connectors , Electronic components, etc. Rubber overmolding metal: We use CNC machining/metal casting/sheet metal bending/sheet metal stamping on metal materials to pre-mold the designed substrate, and then wrap the rubber material on the surface of the metal substrate through overmolding to present a soft rubber layer. Such as fitness equipment, medical supplies, hammer handles, children’s toys, etc. See extra info at https://www.china-plasticparts.com/.
Rotational molding has also become rotomoulding. It is a kind of manufacturing process that is very versatile and suitable for various industries. It can be customized to produce hollow plastic molding products of various shapes and sizes. No matter the batch is large or small, the volume is large or small, roto molding services Both can achieve multi-functional manufacturing functions. Professional rotomolding mold engineers will have great design freedom, because this is a plastic molding process that does not limit any shape and size, similar to casting technology.
In the production process, it is difficult to completely fill the mold, and there are certain technical requirements. After the curing stage is over, different products have different stiffness, which has an impact on product performance. For products with high dimensional accuracy requirements (especially for multi-cavity molds), the process is somewhat short. The flash of the final product is thicker, and the workload of removing the flash is large. The shortcomings of compression molding are that the mold manufacturing is complicated, the investment is relatively large, and coupled with the limitation of the press, it is most suitable for mass production of small and medium composite materials.